Plumber Vancouver - Basic Answers
{You Can Handle All Your HVAC Woes Easily With The Help Of This Article
In order to maintain a happy home, the last thing you want is for your HVAC system to go bad. Just thinking of it going bad on the hottest day of the year is enough to give your nightmares. It seems like this is when these systems decide to go bad. This can be prevented with good solid prevention tips that anyone can follow. Keep reading the article below.
Make sure you check the filters in your air conditioning unit. This is important because checking your filters could make the difference between inexpensive repairs and more expensive ones down the line. Try to put it into your monthly schedule so that you don't forget to check the filters regularly.
When a contractor gives you a list of references, be sure to make use of it. Call the people on the list and ask about the quality of the work, how closely they came to their quote and whether or not the work was completed according to the promised timeline.
Boost energy efficiency by putting your condenser unit in the shade. As your air conditioner sucks in cool air, little will have to be done to cool it any further, saving you a ton on your energy bills.
One of the most important things to consider when purchasing a new heating and cooling system is the manufacturer's warranty. Units come with a variety of warranties. Choose one with a long warranty for maximum long term savings. Generally, it is advised that homeowners should purchase the extended warranty if one is offered.
Whenever possible, try to shade the compressor unit outside. The air that's in a place that is shaded is usually five to six degrees cooler than the surrounding air. Your air conditioning unit will be up to ten percent more efficient if it is properly shaded during the summer months.
Make sure the equipment you are buying is ENERGY STAR compliant. It may seem a small thing, but it isn't. Products that are ENERGY STAR compliant can save you a lot of money in energy costs over the year. It can be over $100 easily, sometimes a lot more.
Figure out how long the HVAC company you choose has been in business. This will ensure that you find someone who knows their stuff. If you choose to hire a new contractor, you may be risking things.
To save money on your HVAC system, turn the air conditioning down at night and let your home warm up a bit. To keep yourself cool, use a chilling water-filled pillow to cool down your head and your whole body as a result. This combined with a fan will keep you from overheating while saving on your utility here bills.
If you need a HVAC contractor, try and get recommendations from family and friends. Find someone that has a lot of quality work under their belt. This is also a great way to get names of companies that should be avoided.
If you have fans in place to help make your HVAC more efficient, be sure that they're turning in the right direction. They should be pushing air downwards over the people in the room to help cool their skin. If it's blowing upwards, all it does is push hot air into the room.
A radiant barrier improves the efficiency of your HVAC. It blocks outside heat from coming in which will make sure you won't have to use more energy to keep your home cool when it's hot outside. If it is done correctly, it is even possible to convert the attic as a living space.
Be careful of sounds in your HVAC. If the condenser fan begins to make a grating or clicking sound, the blades could be hitting an obstruction. If blades get bent, don't try straightening them. You could unbalance them and cause them to hit the condenser coil. This could loosen the motor in the fan. Try replacing the bent blades with new ones. Make sure the new blades can freely rotate without wobbling.
Be careful of sounds in your HVAC. If the condenser fan begins to make a grating or clicking sound, the blades could be hitting an obstruction. If blades get bent, don't try straightening them. You could unbalance them and cause them to hit the condenser coil. This could loosen the motor in the fan. Try replacing the bent blades with new ones. Make sure the new blades can freely rotate without wobbling.
For your outdoor HVAC unit, make sure that your foliage is cleared around it. Two feet distance between the HVAC unit and shrubs is a good amount to remember. If you let the foliage creep up on the unit, it can cause all sorts of issues with debris and growth into the system.
Never hire anyone to work on your HVAC system unless they are licensed and bonded. This industry is one where mistakes happen often and you want to make sure that you are protected. You do not want to be stuck paying for medical bills that are more expensive than the work you were having done.
If you can, find a way to create shade over your outdoor HVAC unit. This can actually save you money as shaded air being pulled in by the HVAC unit is typically 5 to 6 degrees cooler than air that's heated by direct sunlight. It's a smart solution to lowering those energy bills.
Keep your evaporator coil clean. A dirty coil will cause the unit to strain when cooling air. You can clean the coil yourself easily. Simply remove the front panel to expose the coil and use a soft brush attached to a vacuum to remove any dust and debris that has accumulated on the coil.
Ask your neighbors who they have fixing their HVAC systems. Neighborhoods are often built at the same time and will have the same set-ups for heating and cooling. That means if someone did a good job on their unit, they should offer you the same high quality service as well.
As you can see from the above article, you now understand how it vital it is to have a properly maintained HVAC system. If you don't provide regular maintenance, you could have costly fixes down the road. You should not want that, so remember these tips to help you keep your HVAC system running right for many years to come.
Meet Bernard the Roughneck, Canada's Joe the Plumber
Canada may have found its very own Joe the Plumber in Bernard Hancock, aka Bernard the Roughneck, a 32-year-old oil-rig worker who made waves when he showed up to the House of Commons dressed in greasy coveralls and a red hard hat.
Like the American Samuel Joseph Wurzelbacher, who rose to fame as a right-wing everyman during the 2008 US presidential election, Hancock has become the public face of the Alberta oil industry and its employees.
His face and his trademark mop of curly hair are plastered on T-shirts and mugs.
Last week, he appeared on Parliament Hill in his oil-rig getup to support a petition asking the federal government to do more to help Canada's struggling oil and gas industry.
"Families are being destroyed," he said.
The petition, which had 35,000 signatures, was tabled by Alberta Conservative MP Shannon Stubbs and organised by the Canadian Association of Oilwell Drilling Contractors (CAODC), a pro-oil advocacy group.
Canada’s climate change dilemma
Like many, Mr Hancock was lured out to Alberta with the promise of relatively high wages for relatively low-skilled work. Canada exports CA$220bn (USD$168bn; £129bn) in natural resources a year, mostly to the United States, and the sector accounts for 17% of its GDP, according to 2015 data provided by Natural Resources Canada.
In Alberta, the third-largest oil producer in the world, the oil and gas industry employed approximately 155,000 people in 2015, about 11% fewer than in 2014, according to the Alberta government.
The Canadian Association of Petroleum Producers says that since 2015, the industry lost 40,000 direct jobs - 100,000 when one includes indirect jobs.
Industry advocates blame the downturn on the low price of oil, the cancellation of the Keystone XL pipeline project in 2015, and the federal Liberal government's proposal to introduce a carbon tax.
https://docs.google.com/presentation/d/1aPtc6NECGxbLP-wpZEG0k3o0zCyyXmaz3nqzCM8y_N8/edit?usp=sharing